Series 5513 Contact Thermocouple
The series 5513 Contact Thermocouple is recommended for plastic molding and bearing temperature movements up to 900 F. It is capable of monitoring rapid temperature changes where constant contact of the hot junction is required. A spring loaded bayonet cap is standard with this unit.
Features:
- Spring Loaded Bayonet Cap
- Recommended for Plastic Molding and Bearing Temperature Measurements up to 900°F (480°C)
- An Ideal Assembly Where Constant Contact of the Hot Junction is Required to Indicate Rapid Temperature Changes
Custom Options
None or Special Request
Lead Wire
Fiberglass
Fiberglass with Stainless Steel Overbraid
Teflon
Teflon with Stainless Steel Overbraid
Fiberglass with Stainless Steel Overbraid
Teflon
Teflon with Stainless Steel Overbraid
Termination Style
111 Standard Plug
131 Mini Plug
3" Pig Tail
131 Mini Plug
3" Pig Tail
Sheath Material
304 Stainless Steel
316 Stainless Steel
Inconel 600
316 Stainless Steel
Inconel 600
Junction Style
Grounded Rounded Tip
Ungrounded Rounded Tip
Ungrounded Flat Tip
Ungrounded Rounded Tip
Explosed
Ungrounded Rounded Tip
Ungrounded Flat Tip
Ungrounded Rounded Tip
Explosed
Lead Length "X"
Specify in whole inches 01 to 99
Immersion Length "L"
Specify in inches 01 to 99 (6 inch increments standard). For lengths over 99 inches, consult factory
Sheath Diameter
0.187"
0.250"
0.250"
Wire Calibration
Iron/Constantan
Chromel/Alumel
Copper/Constantan
Chromel/Constantan
Chromel/Alumel
Copper/Constantan
Chromel/Constantan
Find Your Part Number
Not sure? Call for help. Phone: 304-387-1200
| Part Number | Description |
|---|